This 12V power inverter provides 600W continuous and 1200W peak power from car battery to 110V/120V or 220V/230V/240V AC household power. With full safety protections against low voltage, high voltage, over load, over heating, short circuit and reverse connection, this inverter is great for powering devices or appliances which is less than 600W such as mobile phone, laptop, iPad, kindle, digital camera, fan, light, TV, etc.
600W 12V Inverter Specification
| Model |
ATO-M600W |
| Input Voltage |
DC 12V |
| Output Voltage* |
1-Phase (L, N, G) 110V/120V AC ±5% or 220V/230V/240V AC ±5%
- NOT provide split phase configuration (L1, L2+N, G) |
| Unload Current (less than) |
0.3A |
| Continuous Power |
600W |
| Peak Power |
1200W |
| Output Frequency |
50Hz±0.5Hz or 60Hz±0.5Hz |
| Output Waveform* |
Modified sine wave or Pure sine wave |
| Max. Efficiency |
90% |
| USB Port |
5V 1A |
| Outlet Type* |
Universal outlet *1 |
| Input Voltage Range |
10V-15.5V |
| Low Voltage Alarm |
10.5V±0.5V |
| Low Voltage Protection |
10V±0.5V |
| High Voltage Protection |
15.5V±0.5V |
| Overload Protection |
Yes |
| Overheat Protection |
Yes |
| Short Circuit Protection |
Yes |
| Reverse Connection Protection |
Yes |
| Cooling Method |
Intelligent cooling fan |
| Working Temperature |
-10℃ ~ +50℃ |
| Storage Temperature |
-30℃ ~ +70℃ |
| Product Size |
225x115x60mm |
| Net. Weight |
970g |
| Warranty |
1 year |
| Remote Control * |
Wired control (3m) or Wireless control (20m)
-Wired control ONLY applies to pure sine wave inverter |
Note: * The AC output is 1-Phase (L, N, G), NOT Split Phase like USA standard (L1, L2+N, G).
Output Sockets (Optional)
Protection Function
- Low voltage
Alarm at first; voltage continuously reduce, LED Red light on & shut down.
- Over voltage
LED Red light on, shut down
- Over load
LED Red light on, shut down
- Over temperature
Alarm at first; temperature continuously rise, LED Red light on & shut down.
- Short circuit
LED Red light on
- Input reverse polarity
Fuse burn-out
Power Inverter Applications
Tips: Structure and Pinciple of power inverter
The power inverter is a kind of DC to AC transformer, and it is actually a process of voltage inversion compared with the converter. The converter is to convert the AC power of the mains grid into a stable 12V DC output, while the inverter is to convert the 12V DC voltage of the adapter into high-frequency high-voltage alternating current. Both of converter and inverter use the pulse width modulation (PWM) technology. The inverter is made of inverting circuit, logic control circuit and filtering circuit, mainly including input interface, voltage start circuit, MOS switch, PWM controller, DC conversion circuit, feedback circuit, LC oscillation and output circuit, load and so on.
In brief, the control circuit of the power inverter controls the operation of the whole system, the inverting circuit plays role of converting direct current into alternating current, and the filtering circuit is used to filter out undesired signals. The more specific work of the inverting circuit is as follows: firstly, the LC oscillation circuit converts DC power into AC power; secondly, the coil steps up the irregular alternating current into a square alternating current; finally, the square alternating current is rectified to sine wave alternating current.
