12V 2000W pure sine wave inverter with LCD display, remote ON/OFF, AC 110V/120V/220V/230V/240V, built-in overload, short circuit, over voltage, under voltage, over temperature protection functions, high reliability.
Note: If the load is a refrigerator or similar to a refrigerator with a compressor, it is recommended that the power of the inverter is more than 10 times the power of the load.
||Universal socket *1
||DC 12V (9.5-15.5V)
|AC Output Voltage
1- Phase (L + N, G)= 110V, 230V ±5%
Do Not provide split phase configuration (L1, L2 + N, G)
|No-load Current (less-than)
||50Hz or 60Hz
||Pure Sine Wave
|Max Working Efficiency
||First alarm (breaking alarm sound is one), LED red light flashes, voltage continues to decrease and shut down
||Continuous alarm, LED flashing red, off
|Over Temperature Protection
||First alarm (broken alarm sound is two), the temperature continues to rise, LED red light flashes and turns off
|Short Circuit Protection
||Short circuit protection without breaking the circuit
|Undervoltage Alarm Range
|Undervoltage Protection Range
|Overvoltage Protection Range
|Undervoltage Recovery Range
|Overvoltage Recovery Range
||Built-in intelligent cooling fan
||2 Pure copper connection wires + 4 spare fuses
Output Sockets (Optional)
Note: Inverter output voltage is 1-phase (L, N, G) only, Do Not provide split phase configuration (L1, L2 + N, G).
Pure Sine Wave Inverter Remote Control & LCD Display (Optional)
- Pure sine wave power inverter is available with remote control: wired control and wireless control.
- LCD display shows input voltage, output voltage, output frequncy, battery capacity and power.
- Intelligent integrated circuit control
Unique front and rear dual soft start technology, CPU core, SPWM pulse width control technology, special constant power technology, anti-reverse diode technology.
- Pure sine wave
100% pure sine wave output, low distortion, waveform and main power line AC waveform are basically the same, equipment accuracy is small, low interference, low noise, strong load capacity, can meet any type of AC load, without damaging the load.
- Imported parts
The materials are imported components, and the panel uses double-sided circuit boards to ensure high quality and high performance of the products, and to match the excellent quality of the detailed molds.
- Aluminum alloy casing
The surface of the aluminum alloy shell is sprayed and anodized, which is small in size, elegant in appearance and easy to carry.
- Working instructions intuitive working state
When the inverter undervoltage/overvoltage, overload, overtemperature, short circuit, the LED indicator lights.
- Multiple protection functions
- Fault warning/buzzer alarm reminder
When the inverter high voltage, low voltage, over temperature, overload protection function is turned on, once the protection of the inverter is triggered, the inverter disconnects the power supply and the load enters the protection mode for the first time, and issues an alarm through the buzzer alarm device. Make your use more secure.
Tips: Factors Affecting the Efficiency of the Household Inverter
First, when converting DC current into AC sine wave, it is necessary to use a circuit using a power semiconductor to switch the DC current. At this time, the power semiconductor heats up to cause loss, but the loss can be made by improving the design of the switching circuit. Reduce to a minimum. Second, the efficiency of the inverter control is used to improve efficiency. The output current and voltage of the solar panel change with sunshine and temperature, and the inverter can optimally control the current and voltage to achieve the maximum amount of power, that is, the best time can be found in the shorter time. Power points, the conversion efficiency will be higher.