5000W 48/96V Solar Inverter with MPPT Charge Controller

Solar Inverter with MPPT Charge Controller User Manual

How to use mppt solar charge controller?

1. Connect the battery:
   Connect the battery cable to the two terminals in the middle of the mppt charge controller with the correct polarity (the controller is marked with a battery icon).
   Make sure the battery voltage is within the range allowed by the controller and set the battery type.
2. Connect the solar cell module:
   Make sure the solar cell module is not exposed to light and does not exceed the maximum allowable input power and maximum solar terminal voltage.
   Connect the solar cell module to the terminals on the left of the mppt solar regulator with the correct polarity (the controller is marked with a solar cell module icon).
3. Turn on the controller:
   Turn on the mppt solar charge controller according to the steps in the mppt solar controller manual, which usually involves turning on the circuit breaker or switch connected to the battery, solar cell module, and load.
4. Set parameters (if necessary):
   Set parameters such as charging voltage, overcharge protection voltage, low voltage protection voltage, etc. through the 48v solar charge controller's operating interface or related software according to actual needs.
5. Monitoring and maintenance:
   Regularly check the operating status and indicator lights of the controller for normal operation.
   If abnormalities are found, troubleshoot and handle the faults promptly through the controller's display interface or related software.