1.5 kW Three Phase Solar Pump Inverter

3 Phase 1.5 kW (2 hp) solar pump inverter, DC and AC power input switchable solar water pump controller, 3-phase AC 230/400/480V for selection, built-in MPPT system, can be used for monoblock as well as submersible pump.

Be the first to review this product

SKU: GK330-1R5D-3B

Free shipping

Delivery date: 6-12 days

Input Voltage (Three Phase) ±15% *

$295.10

Qty:

Products specifications

User Manual	Solar Pump Inverter User Manual

Brand new 1.5 kW solar pump inverter, converts the DC power from solar panels to three phase AC power, providing water for remote areas lacking of electricity.

Specification

Basics	Model	GK330-1R5D-3B
	Capacity	1.5 kW (2 hp)
	Weight	2.5 kg
	Product dimension	189.5167120 mm
Input Feature	Input voltage	DC 200~350V at 220V; DC 350~750V at 380/480V Three phase 220/380/480V AC (±15%)
	Rated input current	5.8 A at 220V 5 A at 380/480V
	Input frequency	47~63 Hz
Output Feature	Output voltage	Three phase 0~rated input voltage
	Rated output current	5.1 A at 220V 3.8 A at 380/480V
	Output frequency	0~400 Hz
Control	Control mode	SVPWM, SVC
	Motor type	Asynchronous motor
	Speed ratio	Asynchronous motor 1:100 (SVC)
	Speed control accuracy	±0.2%(SVC)
	Speed fluctuation	±0.3%(SVC)
	Torque response	<20ms (SVC)
	Torque control accuracy	10%(SVC)
	Starting torque	0.25 Hz / 150% (SVC)
	Overload capability	150% of rated current: 1 minute 150% of rated current: 10 seconds 200% of rated current: 1 second
Running control	Frequency setting method	Digital settingAnalog setting Pulse frequency setting Multi-step speed running settingSimple PLC setting PID setting, MODBUS communication setting Shift between the set combination and set channel
	Operation method	Keyboard/ terminal/ communication
	Auto-adjustment of voltage	Keep a stable voltage automatically when the gird voltage transients
	Fault protection	Overcurrent, overvoltage, undervoltage, overheating, phase loss, overload, etc.
	Special functions for PV water pumps	Maximum power tracking, pre-warning at weak light, auto wake up at strong light, Pre-warning when full water, auto wake up at low water level, Underload pre-warning and protection of water level sensor, When pre-warning, the inverter is in stand-by
Environment	Environment temperature	-10℃~40℃ (environment temperature is among 40℃~50℃; please use it with derating)
	Storage temperature	-20℃~65℃
	Environment humidity	Less than 90 % R.H, not exceeding 90% R.H
	Altitude, Vibration	Below 1000 m, below 5.9m/s² (=0.6g)
	Cooling method	Forced cooling and natural air cooling
	Enclosure rating	IP 20

Features

Solar pump inverter adopts advanced MPPT control technology, real-time detection of solar panels power voltage, tracking the highest voltage and current, efficiency is as high as 98%.
It can enter automatically to sleep mode when the intensity of sunlight is weak, as well as can exit the sleep mode when the intensity of sunlight is becoming strong.
Automatic sleep when on high-water level and automatic restart when on low-water level to realize automatic control through water level.
Multiple power supply design, power input can be solar energy photovoltaic DC power supply (DC 200 ~ 350V, DC 350~750V), can also be single phase or three phase AC power, simple wiring.
Smart operation, water level detection and operation panel to prevent overflow, dry pumping.
Protect itself in trouble and improve the reliability of whole system.

solar pump inverter wiring application

Tips: Solar pump system is modular and can be upgraded over time
The components that make up the solar water pump system are very modular. They can be replaced and upgraded according to their needs. Additional solar panels can be added if overcast, low light and performance requirements are increased. If more water is needed every day, batteries and additional panels can be added. If more volume is needed, the pump can be replaced with a higher power model with higher flow rate.