12V 600 Watt Pure Sine Wave Inverter

High efficiency 600W pure sine wave inverter convert 12 volt DC to 110V/230V AC output voltage, with USB charging port, output frequency 50Hz/60Hz.

Note: If the load is a refrigerator or similar to a refrigerator with a compressor, it is recommended that the power of the inverter is more than 10 times the power of the load.

Specificaton

Output Sockets (Optional)
Note: Inverter output voltage is 1-phase (L, N, G) only, Do Not provide split phase configuration (L1, L2 + N, G).

Features

• Intelligent integrated circuit control
  Unique front and rear dual soft start technology, CPU core, SPWM pulse width control technology, special constant power technology, anti-reverse diode technology.
• Pure sine wave
  100% pure sine wave output, low distortion, waveform and main power line AC waveform are basically the same, equipment accuracy is small, low interference, low noise, strong load capacity, can meet any type of AC load, without damaging the load.
• Imported parts
  The materials are imported components, and the panel uses double-sided circuit boards to ensure high quality and high performance of the products, and to match the excellent quality of the detailed molds.
• Aluminum alloy casing
  The surface of the aluminum alloy shell is sprayed and anodized, which is small in size, elegant in appearance and easy to carry.
• Working instructions intuitive working state
  When the inverter undervoltage/overvoltage, overload, overtemperature, short circuit, the LED indicator lights.
• Multiple protection functions
• Fault warning/buzzer alarm reminder
  When the inverter high voltage, low voltage, over temperature, overload protection function is turned on, once the protection of the inverter is triggered, the inverter disconnects the power supply and the load enters the protection mode for the first time, and issues an alarm through the buzzer alarm device. Make your use more secure.

Applications

Tips: What is an Inductive Load?
High-power electrical products made by the principle of electromagnetic induction, such as electric motors, compressors, relays, fluorescent lamps, and so on. This type of product requires a much larger starting current (approximately 3-7 times) than the current required to maintain normal operation. For example, a refrigerator that consumes about 100 watts of electricity during normal operation can have a starting power of more than 900 watts. Since the inductive load is connected to the power supply or disconnected from the power supply, a back electromotive voltage is generated. The peak value of this voltage is far greater than the voltage that the inverter can withstand, which easily causes the instantaneous overload of the inverter. The life of the inverter. Therefore, such electrical appliances have higher requirements on the power supply waveform.