600 Watt Pure Sine Wave UPS Inverter

Lowest price 600 watt (650VA) pure sine wave power inverter with USB output port. It can meet any type of AC load, without damaging the load, small in size, elegant in appearance and easy to carry.

Note: If the load is a refrigerator or similar to a refrigerator with a compressor, it is recommended that the power of the inverter is more than 10 times the power of the load.

Features:

• 600W ups inverter with pure sine wave output (THD＜3%)
• UPS inverter built-in 3-stages battery charger, allow to run loads while charging.
• Automatically switch with a ultra-fast switching time.
• Soft-start technology.
• High efficiency-converts the battery’s available power.
• 90% pure sine wave output, low distortion, waveform and main power line AC waveform are basically the same, equipment accuracy is small, low interference, low noise, strong load capacity, can meet any type of AC load, without damaging the load.
• Aluminum shell with good heat dissipation and strong shock resistance.
• Optional crocodile clip and cigar lighters, easy to connect batteries or vehicles' batteries.
• USB charging port in uninterruptible power supply inverter: 5V, ideally qualified for powering your phone, laptop, pc, etc.
• LED indicators for power and protections.
• Switch-mode design in sine wave inverter, easy to use.
• UPS inverter with intelligent fan for cooling, long use life.

Parameter List:

Pure Sine Wave UPS Inverter Output Sockets (Optional)Application:

Tips：Function of Pure Sine Wave UPS Inverter

• Automatic voltage stabilizing function. When the battery voltage fluctuates between undervoltage and overvoltage, and the load changes within the rated power range, the device can automatically output voltage.
• Overload protection function. If the AC output power exceeds the rated power, the device will automatically cut off the inverter output, the front panel LCD will display "Overload", and the buzzer will sound for 10 seconds. The "Inverter switch is off" on the front panel, and the "Overload" display disappears. If you need to restart, you must check that the load is within the allowable range, and then turn on the “inverter switch” to restore the inverter's output.
• Overheating protection function. If the temperature of the control part inside the chassis is too high, the device automatically cuts off the output of the inverter. The LCD on the front panel displays "Overheating", and the buzzer sounds an alarm for 10 seconds. After the temperature returns to normal, the output of the inverter returns to normal.
• Battery reverse protection function. If the polarity of the battery is reversed, the chassis of the fuse will fuse automatically, so as not to damage the battery and equipment. But reverse batteries are still forbidden!