Inverter solar panel cable connectors for sale are made of high-quality materials, especially the Y-branch design, providing reliable performance from 4 connections to 1. The solar wire connector is made of high-quality PPO material and has a thickened copper core to ensure efficient conductivity and resistance to pressure and abrasion. In addition, the solar wire connectors have excellent waterproof and dustproof performance to ensure reliable operation in various harsh environments. The design is intended to provide a reliable electrical connection for solar systems while ensuring long-term stability and durability.
Specificatons
Model |
ATO-MCY401 |
Rated Voltage |
1000V |
Rated Current |
30A |
Insulation Material |
PPO Material |
Conductor Material |
Tinned Copper |
Ambient Temperature |
-40℃~+95℃ |
Product Temperature |
-40℃~+135℃ |
Safety Grade |
DCII |
Waterproof Grade |
IP68 |
Contact Resistance |
≤0.35mΩ |
Connection System |
Multi-Point Connectivity |
Self-locking System |
Embedded |
Connection Method |
Crimping |
Wiring Specification |
4mm2/6mm2 |
Flame Retardant Grade |
UL94-VO |
Net Weight |
440g |
Features
- High Quality PPO Material
The solar panel cable connector is made of high quality PPO material, which is not only resistant to radiation, low temperature and high temperature, but also resistant to high strength, impact resistance and flame retardant function.
- High Strength Waterproof Ring
The solar cable connectors use high-strength waterproof ring as the internal structure, the waterproof ring is made of insulating silicone, which can be waterproof and dustproof, with a protection level of IP68.
- T2 Copper Cconductor
Solar wire connectors use open type core, all for the copper tin/silver plating, this material is wear-resistant, corrosion-resistant ability is very strong, and T2 copper conductor itself has the characteristics of oxidation, resistance is small and conductivity is strong.
- Stable Self-locking Structure
The connection of solar cable connector adopts the compression method to connect, the male and female connectors are equipped with self-locking structure, which can make the solar connector open and close freely.
Dimension ( Unit: mm )
Application
Tips: How to Install Solar Cable Connector, Y Branch 4 to 1?
- Location Selection: Ensure that the mounting location is not far from the solar panel to minimize energy loss. Select a fixed bracket or support structure to ensure the stability of the connector.
- Cable Measurement: Measure the cable to ensure that it is of sufficient length to allow the Y-branch solar cable connector to be connected to each solar panel.
- Preparing for Connection: Strip the insulation from the end of the cable to reveal enough conductors. Make sure the conductor surface is clean and free of oxides.
- Y-Branch Connection: Properly insert the Y-branch of the solar wire connector into the bare conductor of each cable. Make sure the plug is secure to prevent loss of current.
- Secure Installation: Using the proper tools, ensure that the solar panle cable connector and cable are securely mounted on the bracket. The waterproof ring should be properly installed to ensure that the connector is waterproof.
- Waterproof Treatment: Ensure that the connector is in a waterproof condition. Silicone or other waterproof sealing material can be used to cover the connection part to improve the waterproof level.
- Inspection and Testing: After the connection is completed, carry out system inspection and testing to ensure that the PV panel connector is working properly, the current transmission is stable, and there is no leakage or short circuit.
- Record and Maintenance: Record the installation information of the solar cable connector and regularly check the status of the solar connector to ensure its normal operation.
Throughout the installation process, be sure to follow the installation guidelines and precautions provided by the manufacturer of the solar panel and solar panel cable connector to ensure the safety and performance of the system. If necessary, it is recommended that the installation be carried out by a specialized technician.